Picture of Sobhit Ranjan Panda
by Sobhit Ranjan Panda - Wednesday, 24 July 2019, 10:10 PM

For making this machine you need:

  • Cardboard
  • Hot glue
  • Knife
  • Case for disk
  • Stickers
  • 2 Euro Coin
  • Snickers chocolate
  • Mars chocolate
  • Kit Kat chocolate

    Step 1: Place for Chocolates

First you need to take the cardboard.

Cut in the right places as in the picture

Then they need to be glued together

Step 2: Pusher for Chocolates

It is necessary to cut a pusher for chocolates.

This device will push the chocolate to us.

Step 3: Platform for the Device

You need to trim and prepare a pusher platform.

Step 4: Сonnect Platform and Collector

Now we connect the platform and the collector for the chocolates.

Step 5: Cut Out the Hole for the Coins and Install the Pusher

You need to cut out the hole for the coins as indicated. Also fix the pusher to the platform.

Step 6: ​Install the Coin Trap

To do this, cut the trap and collector.

It is important that the holes of the collector coincide with the first hole in the platform

Step 7: Extrusion Device

In this cardboard there must be a hole for the coin, where the coin comes.

Without a coin, it will slide.

Step 8: ​Box for the Device.

For full operation, you need three devices.

We fix everything and fix it.But you can make a collector for coins.

Step 9: Decoration and the End of Work.

You can decorate or highlight the device.
[ Modified: Wednesday, 24 July 2019, 10:18 PM ]